Edit on GitHub

Tips for Building Packages

BinaryBuilder provides a convenient environment to enable cross-platform building. But, many libraries have complicated build scripts that may need to be adapted to support all of the BinaryBuilder targets.

If your build fails with some errors, look at the Build Troubleshooting page.

If you have additional tips, please submit a PR with suggestions.

Initiating different shell commands based on target

Sometimes, you need to adapt build scripts based on the target platform. This can be done within the shell script. Here is an example from OpenBLAS:

# Set BINARY=32 on i686 platforms and armv7l
if [[ ${nbits} == 32 ]]; then
    flags="${flags} BINARY=32"
fi

Here are other examples of scripts with target-specific checks:

It is also possible to run quite different scripts for each target by running different build scripts for different sets of targets. Here is an example where windows builds are separated from other targets:

Autoconfigure builds

Autoconfigure builds are generally quite straightforward. Here is a typical approach:

./configure --prefix=$prefix --build=${MACHTYPE} --host=${target}
make -j${nproc}
make install

Here are examples of autoconfigure build scripts:

CMake builds

For CMake, the wizard will suggest a template for running CMake. Typically, this will look like:

cmake -DCMAKE_INSTALL_PREFIX=${prefix} -DCMAKE_TOOLCHAIN_FILE=${CMAKE_TARGET_TOOLCHAIN} -DCMAKE_BUILD_TYPE=Release

The toolchain file sets up several CMake environment variables for better cross-platform support, such as CMAKE_SYSROOT, CMAKE_C_COMPILER, etc... Examples of builds that include CMake parts include:

  • JpegTurbo

  • Sundials

    • Needs to copy *.dll files from ${prefix}/lib to ${libdir} for Windows
    • Needs KLU_LIBRARY_DIR="$libdir", so CMake's find_library can find libraries from KLU

Meson builds

BinaryBuilder supports also building with Meson. Since this is going to be a cross-compilation, you have to specify a Meson cross file:

meson --cross-file="${MESON_TARGET_TOOLCHAIN}" --buildtype=release

After configuring the project with meson, you can then build and install it with

ninja -j${nproc}
ninja install

The wizard automatically suggests using Meson if the meson.build file is present.

Examples of builds performed with Meson include:

  • gdk-pixbuf: here meson uses platform-dependent options;
  • libepoxy: this script modifies c_args in the Meson cross file in order to add an include directory;
  • xkbcommon.

Go builds

The Go toolchain provided by BinaryBuilder can be requested by adding :go to the compilers keyword argument to build_tarballs: compilers=[:c, :go]. Go-based packages can usually be built and installed with go:

go build -o ${bindir}

The Go toolchain provided by BinaryBuilder automatically selects the appropriate target.

Example of packages using Go:

  • pprof: it uses go build to compile the program and manually moves the executable to ${bindir}.

Rust builds

The Rust toolchain provided by BinaryBuilder can be requested by adding :rust to the compilers keyword argument to build_tarballs: compilers=[:c, :rust]. Rust-based packages can usually be built with cargo:

cargo build --release

The Rust toolchain provided by BinaryBuilder automatically selects the appropriate target and number of parallel jobs to be used. Note, however, that you may have to manually install the product in the ${prefix}. Read the installation instructions of the package in case they recommend a different build procedure.

Example of packages using Rust:

  • Tokei: it uses cargo build to compile the program and manually moves the executable to ${bindir};
  • Librsvg: it uses a build system based on Autoconf which would internally call cargo build, but the user has to follow the ./configure + make + make install sequence.
Warn

The Rust toolchain currently used does not work with the i686-w64-mingw32 (32-bit Windows) platform.

Editing files in the wizard

In the wizard, the vim editor is available for editing files. But, it doesn't leave any record in the build script. One generally needs to provide patch files or use something like sed. If a file needs patching, we suggest using git to add the entire worktree to a new repo, make the changes you need, then use git diff -p to output a patch that can be included alongside your build recipe.

You can include local files like patches very easily by placing them within a bundled/patches nested directory, and then providing "./bundled" as one of the sources for your build. See, for example, OpenBLAS.

Automatic environment variables

The following environment variables are automatically set in the build environment and should be used to build the project. Occasionally, you may need to tweak them (e.g., when Using GCC on macOS and FreeBSD).

  • CC: the C cross compiler
  • CXX: the C++ cross compiler
  • FC: the Fortran cross compiler

The above variables point to utilities for the target environment. To reference the utilities for the host environment either prepend HOST or append _HOST. For example, HOSTCC and CC_HOST point to the native C compiler.

These are other environment variables that you may occasionally need to set during a build

  • CFLAGS: options for the C compiler
  • CXXFLAGS: options for the C++ compiler
  • CPPFLAGS: options for the C pre-processor
  • LDFLAGS: options for the linker
  • PKG_CONFIG_PATH: a colon-separated list of directories to search for .pc files
  • PKG_CONFIG_SYSROOT_DIR: modifies -I and -L to use the directories located in target sysroot

The following variables are useful to control the build script over different target systems, but are not intended to be modified by the users:

  • prefix: the path to the top-directory of where all the products should be installed. This will be the top-directory of the generated tarball
  • libdir: the path to the directory where the shared libraries should be installed. This is ${prefix}/bin when building for Windows, ${prefix}/lib for all other platforms
  • bindir: the path to the directory where the executables should be installed. This is equivalent to ${prefix}/bin
  • includedir: the path to the directory where the header files should be installed. This is equivalent to ${prefix}/include
  • similar variables, with analogous meaning, exist for the host prefix (where HostBuildDependency are installed): ${host_prefix}, ${host_bindir}, ${host_libdir}, ${host_includedir}
  • target: the target platform
  • bb_full_target: the full target platform, containing things like libstdc++ string ABI platform tags, and libgfortran version
  • MACHTYPE: the triplet of the host platform
  • nproc: the number of processors of the host machine, useful for parallel building (e.g., make -j${nproc})
  • nbits: number of bits of the target architecture (usually it is either 32 or 64)
  • proc_family: target processor family (e.g., "intel", "power", or "arm")
  • dlext: extension of the shared library on the target system. It is "dll" for Windows, "dylib" for macOS, and "so" for the other Unix systems
  • exeext: extension of the executable on the target system, including the dot if present. It is ".exe" for Windows and the empty string "" for all the other target platforms
  • SRC_NAME: name of the project being built

Using GCC on macOS and FreeBSD

For these target systems Clang is the default compiler, however some programs may not be compatible with Clang.

For programs built with CMake (see the CMake build section) you can use the GCC toolchain file that is in ${CMAKE_TARGET_TOOLCHAIN%.*}_gcc.cmake.

If the project that you want to build uses the GNU Build System (also known as the Autotools), there isn't an automatic switch to use GCC, but you have to set the appropriate variables. For example, this setting can be used to build most C/C++ programs with GCC for FreeBSD and macOS:

if [[ "${target}" == *-freebsd* ]] || [[ "${target}" == *-apple-* ]]; then
    CC=gcc
    CXX=g++
fi

Dependencies for the target system vs host system

BinaryBuilder provides a cross-compilation environment, which means that in general there is a distinction between the target platform (where the build binaries will eventually run) and the host platform (where compilation is currently happening). In particular, inside the build environment in general you cannot run binary executables built for the target platform.

For a build to work there may be different kinds of dependencies, for example:

  • binary libraries that the final product of the current build (binary executables or other libraries) will need to link to. These libraries must have been built for the target platform. You can install this type of dependency as Dependency, which will also be a dependency of the generated JLL package. This is the most common class of dependencies;

  • binary libraries or non-binary executables (usually shell scripts that can actually be run inside the build environment) for the target platform that are exclusively needed during the build process, but not for the final product of the build to run on the target system. You can install this type of dependency as BuildDependency. Remember they will not be added as dependency of the generated JLL package;

  • binary executables that are exclusively needed to be run during the build process. They cannot generally have been built for the target platform, so they cannot be installed as Dependency or BuildDependency. However you have two options:

    • if they are available in a JLL package for the x86_64-linux-musl platform, you can install them as HostBuildDependency. In order to keep binaries for the target platform separated from those for the host system, these dependencies will be installed under ${host_prefix}, in particular executables will be present under ${host_bindir} which is automatically added to the ${PATH} environment variable;
    • if they are present in Alpine Linux repositories, you can install them with the system package manager apk.

    Remember that this class of dependencies is built for the host platform: if the library you want to build for the target platform requires another binary library to link to, installing it as HostBuildDepency or with apk will not help.

You need to understand the build process of package you want to compile in order to know what of these classes a dependency belongs to.

Installing the license file

Generated tarballs should come with the license of the library that you want to install. If at the end of a successful build there is only one directory inside ${WORKSPACE}/srcdir, BinaryBuilder will look into it for files with typical names for license (like LICENSE, COPYRIGHT, etc... with some combinations of extensions) and automatically install them to ${prefix}/share/licenses/${SRC_NAME}/. If in the final tarball there are no files in this directory a warning will be issued, to remind you to provide a license file.

If the license file is not automatically installed (for example because there is more than one directory in ${WORKSPACE}/srcdir or because the file name doesn't match the expected pattern) you have to manually install the file. In the build script you can use the install_license command. See the Utilities in the build environment section below.

Utilities in the build environment

In addition to the standard Unix tools, in the build environment there are some extra commands provided by BinaryBuilder. Here is a list of some of these commands:

  • atomic_patch: utility to apply patches. It is similar to the standard patch, but it fails gracefully when a patch cannot be applied:
    atomic_patch -p1 /path/to/file.patch
  • flagon: utility to translate some compiler-flags to the one required on the current platform. For example, to build a shared library from a static archive:
    cc -o "${libdir}/libfoo.${dlext}" -Wl,$(flagon --whole-archive) libfoo.a -Wl,$(flagon --no-whole-archive) -lm
    The currently supported flags are:
    • --whole-archive;
    • --no-whole-archive;
    • --relative-rpath-link.
  • install_license: utility to install a file to ${prefix}/share/licenses/${SRC_NAME}:
    install_license ${WORKSPACE}/srcdir/THIS_IS_THE_LICENSE.md
  • update_configure_scripts: utility to update autoconfigure scripts. Sometimes libraries come with out-of-date autoconfigure scripts (e.g., old configure.sub can't recognise aarch64 platforms or systems using Musl C library). Just run
    update_configure_scripts
    to get a newer version. With the --reconf flag, it also runs autoreconf -i -f afterwards:
    update_configure_scripts --reconf